Drivers and controllers for electromotors

 
call:
+ 372 6559914
send e-mail:

BM32R-100 - complete DC brush drive with planetary angle gearhead

BM32R-100 is a complete DC brush drive with planetary angle gearhead. It consists of DC brush gearmotor SM32R and a controller BMD. The drive is 24VDC voltage, gearhead with 2 stages - planetary and bevel.

The drive controls motor speed, direction, acceleration and deceleration according signals on the controler's inputs. Motor speed is adjusted by analog voltage signal or by potentiometer - internal (there is a built-in potentiometer on the case of the BMD controller) or external (can be connected to the controller). Start/stop is a digital signal, there are inputs and buttons on the controller's case. Rotation direction is also a digital signal.

The main parameters of DC brush drive BM32R-100

  • Motor power: 8.5W
  • Rated torque: 6.4kgf*cm
  • Rated speed: 65rpm
  • Reduction ratio: 1/100
  • Gearhead type: angle gearhead - planetary and bevel
  • Voltage: 24VDC
  • Current: <0.5Amp
  • Dimensions of gearmotor SM32RP

    Dimensions of gearmotor SM32RP

    Dimensions of DC brush motor controller BMD

    Dimensions of  DC brush motor controller BMD
    BM32R-100 - complete DC brush drive with planetary angle gearhead
    QUICK MESSAGE



    Smart Motor Devices OÜ: Tallinn Science Park Tehnopol
    Mäealuse st. 4, Tallinn 12618, Estonia
    Copyright © 2010-2017 SmartMotorDevices OÜ