Drivers and controllers for electromotors

 
call:
+ 372 6559914
send e-mail:

BM7152-50 - complete DC motor drive with worm gearhead

BM7152-50 is a complete set, included DC motor controller BMD and a DC brush gearmotor SM7152W with worm gearhead 1/50. The drive is reversible, gearhead is self-impeding. Two side output shaft is turned through an angle of 90° relative to the motor shaft.

The drive controls motor speed, direction, acceleration and deceleration according signals on the controler's inputs. Motor speed is adjusted by analog voltage signal or by potentiometer - internal (there is a built-in potentiometer on the case of the BMD controller) or external (can be connected to the controller). Start/stop is a digital signal, there are inputs and buttons on the controller's case. Rotation direction is also a digital signal.

The main parameters of DC brush geardrive BM7152-50

  • Motor power: 150W
  • Rated torque: 104.5kgf*cm
  • Rated speed: 50rpm
  • Reduction ratio: 1/50
  • Gearhead type: worm
  • Voltage: 24VDC
  • Current: <6.5Amp
  • Dimensions of gearmotor SM7152W

    Dimensions of gearmotor SM7152W

    Dimensions of DC brush motor controller BMD

    Dimensions of  DC brush motor controller BMD
    BM7152-50 -  complete DC motor drive with worm gearhead
    QUICK MESSAGE



    Smart Motor Devices OÜ: Tallinn Science Park Tehnopol
    Mäealuse st. 4, Tallinn 12618, Estonia
    Copyright © 2010-2017 SmartMotorDevices OÜ