Drivers and controllers for electromotors

 
call:
+ 372 6559914
send e-mail:

BMS16-690 - DC brush motor drive with planetary gearhead

BMS16-690 is a complete DC brush motor drive with RS-485 interface. It consists of a small size and low power DC brush planetary gearmotor SM16P and a controller BMSD. The drive is 24VDC voltage, low power, small size.

The BMSD controller, included to the complete drive, adjust motion speed, direction, acceleration and deceleration. The motion control provided by input signals or by commands via RS-485 interface.

Motor speed is adjusted by analog voltage signal 0-5VDC, by potentiometer - internal (there is a built-in potentiometer on the case of the BMSD controller) or external (can be connected to the controller) or by a command via RS-485. Start/stop and direction are digital signals, also can be controlled via RS-485. The inputs are duplicated by buttons on the controller's case. Inputs (and buttons) handle a signals as per the front edge or signal level. The version depends on a controller firmware - please, ask when order.

The main parameters of DC brush geared drive BMS16-690

  • Motor power: 1W
  • Rated torque: 3kgf*cm
  • Rated speed: 16rpm
  • Reduction ratio: 1/690
  • Gearhead type: planetary
  • Voltage: 24VDC
  • Current: <0.09Amp
  • Dimensions of gearmotor SM16P

    Dimensions of gearmotor SM16P

    Dimensions of DC brush motor controller BMSD

    Dimensions of  DC brush motor controller BMSD
    BMS16-690 - DC brush motor drive with planetary gearhead
    QUICK MESSAGE



    Smart Motor Devices OÜ: Tallinn Science Park Tehnopol
    Mäealuse st. 4, Tallinn 12618, Estonia
    Copyright © 2010-2017 SmartMotorDevices OÜ