Drivers and controllers for electromotors

 
call:
+ 372 6559914
send e-mail:

BM32R-100 - complete DC brush angle gear drive with RS-485

BMS32R-100 is a complete DC brush drive with planetary angle gearhead. It consists of DC brush gearmotor SM32R and a controller BMSDwith RS-485 communication interface. The drive is 24VDC voltage, gearhead with 2 stages - planetary and bevel.

The BMSD controller, included to the complete drive, adjust motion speed, direction, acceleration and deceleration. The motion control provided by input signals or by commands via RS-485 interface.

Motor speed is adjusted by analog voltage signal 0-5VDC, by potentiometer - internal (there is a built-in potentiometer on the case of the BMSD controller) or external (can be connected to the controller) or by a command via RS-485. Start/stop and direction are digital signals, also can be controlled via RS-485. The inputs are duplicated by buttons on the controller's case. Inputs (and buttons) handle a signals as per the front edge or signal level. The version depends on a controller firmware - please, ask when order.

The main parameters of DC brush drive BMS32R-100

  • Motor power: 8.5W
  • Rated torque: 6.4kgf*cm
  • Rated speed: 65rpm
  • Reduction ratio: 1/100
  • Gearhead type: angle gearhead - planetary and bevel
  • Voltage: 24VDC
  • Current: <0.5Amp
  • Dimensions of gearmotor SM32RP

    Dimensions of gearmotor SM32RP

    Dimensions of DC brush motor controller BMSD

    Dimensions of  DC brush motor controller BMSD
    BMS32R-100 - complete DC brush drive with planetary angle gearhead
    QUICK MESSAGE



    Smart Motor Devices OÜ: Tallinn Science Park Tehnopol
    Mäealuse st. 4, Tallinn 12618, Estonia
    Copyright © 2010-2017 SmartMotorDevices OÜ