Drivers and controllers for electromotors

 
call:
+ 372 6559914
send e-mail:

BMS90-19 and BMS90-201 - planetary DC gear drives with RS-485

BMS90 is a DC complete brush motor drive with planetary gearhead. It is reversible, maintenance-free. We offer two standard reduction ratios - 1/19 - BMS90-19 and 1/201 - BMS90-201. The drives consist of planetary gearmotor SM90P and controller with RS-485 communication interface BMSD.

The BMSD controller, included to the complete drive, adjust motion speed, direction, acceleration and deceleration. The motion control provided by input signals or by commands via RS-485 interface.

Motor speed is adjusted by analog voltage signal 0-5VDC, by potentiometer - internal (there is a built-in potentiometer on the case of the BMSD controller) or external (can be connected to the controller) or by a command via RS-485. Start/stop and direction are digital signals, also can be controlled via RS-485. The inputs are duplicated by buttons on the controller's case. Inputs (and buttons) handle a signals as per the front edge or signal level. The version depends on a controller firmware - please, ask when order.

The main parameters of gear drive BMS90

  • Motor power: 100W
  • Reduction ratio Rated torque, kgf*cm Rated speed, rpm
    1/19 55 100
    1/201 10 180
  • Gearhead type: planetary
  • Voltage: 24VDC
  • Current: <4.2Amp
  • Dimensions of gearmotor SM90P

  • Gearhead lenght L=73.8mm for 1/19 ratio and L=106.8 for ratio 1/201
  • Dimensions of DC brush motor controller BMSD

    Dimensions of  DC brush motor controller BMSD
    Planetary DC gear drive BMS90-19
    QUICK MESSAGE



    Smart Motor Devices OÜ: Tallinn Science Park Tehnopol
    Mäealuse st. 4, Tallinn 12618, Estonia
    Copyright © 2010-2017 SmartMotorDevices OÜ