STEPMOTOR with integrated driver SMD-2.8 mini
SMD-2.8 mini is a step motor driver, which is designed to be buit-in into stepper motors.
At the moment these drivers are offered together with stepper motors as whole assembled units. No need of connecting, adjusting or any other
preparation - the system is a ready to work complete step motor drive.
As SMD-2.8 mini drivers has quite little dimensions, these complete drives save space in a final product.
As these drives are supplied as whole units, no need of connection and adjusting driver and step motor and save personnel's time.
Control mode is standard Pulse/Dir mode – step motor driver receives voltage pulses as Step signal and voltage level as Direction signal. Motion displacement depends on pulses number, motion speed is proportional to pulses frequency. The direction depends on voltage level on DIR input.
The main parameters of tiny built-in stepper driver SMD-2.8 mini
Max. current per phase - 2.8Amp
Power supply - 12-48VDC
Microstepping mode - 1, 1/2, 1/4, 1/16
The main parameters of stepper motor SM5776 with integrated driver SMD-2.8 mini
Maximum holding torque: 18.9 kgf*cm
Maximum current per phase: 2.8A
Phase resistance: 1.13 Ohm
Phase inductance: 3.6 mH
Motor rotor inertia: 480 g*cm2
Dimensions of stepper motor SM5776 with integrated driver SMD-2.8 mini:
Below is the speed-torque curve for the stepper motor SM5776 with built-in driver SMD-2.8 mini. The testing conditions: current per phase - 2.8Amp, 48VDC. Y-axis - torqure, kgf*cm, X-axis - rotation speed, rpm
Click on the image to enlarge.