BMS5946-30 - complete DC worm gear drive with RS-485

BMS5946-30 is a complete DC gear drive. The drive includes worm brush gearmotor SM5946W with reductio ration 1/30 and DC motor controller with RS-485 interface BMSD.

The BMSD controller, included to the complete drive, adjust motion speed, direction, acceleration and deceleration. The motion control provided by input signals or by commands via RS-485 interface.

Motor speed is adjusted by analog voltage signal 0-5VDC, by potentiometer - internal (there is a built-in potentiometer on the case of the BMSD controller) or external (can be connected to the controller) or by a command via RS-485. Start/stop and direction are digital signals, also can be controlled via RS-485. The inputs are duplicated by buttons on the controller's case. Inputs (and buttons) handle a signals as per the front edge or signal level. The version depends on a controller firmware - please, ask when order.

The main parameters of DC gear drive BMS5946-30

  • Motor power: 60W
  • Rated torque: 30kgf*cm
  • Rated speed: 80rpm
  • Reduction ratio: 1/30
  • Gearhead type: worm
  • Voltage: 12VDC
  • Current: <5Amp

Dimensions of gearmotor SM5946W

Dimensions of gearmotor SM5946W

Dimensions of DC brush motor controller BMSD

Dimensions of  DC brush motor controller BMSD