BMS6551-65 - complete DC gear drive with RS-485

BMS6551-65 is a complete DC brush motor drive with worm gearhead. The drive consists of a worm gearmotor SM6551W and a controller BMSD. Motion control by commands via RS-485 is provided.

BMSD controller, included to the complete drive, adjust motion speed, direction, acceleration and deceleration. The motion control provided by input signals or by commands via RS-485 interface.

Motor speed is adjusted by analog voltage signal 0-5VDC, by potentiometer - internal (there is a built-in potentiometer on the case of the BMSD controller) or external (can be connected to the controller) or by a command via RS-485. Start/stop and direction are digital signals, also can be controlled via RS-485. The inputs are duplicated by buttons on the controller's case. Inputs (and buttons) handle a signals as per the front edge or signal level. The version depends on a controller firmware - please, ask when order.

The main parameters of DC brush gear drive BMS6551-65

  • Motor power: 70W
  • Rated torque: 78kgf*cm
  • Rated speed: 54rpm
  • Reduction ratio: 1/65
  • Gearhead type: worm
  • Voltage: 24VDC
  • Current: <2.9Amp

Dimensions of gearmotor SM6551W

Dimensions of gearmotor SM6551W

Dimensions of DC brush motor controller BMSD

Dimensions of  DC brush motor controller BMSD