BMS7165-30 - complete DC worm gear drive with RS-485
We offer DC brush gearmotor SM7165W 1/30 with controller BMSD as a complete set - DC brush geardrive BMS7165-30 with RS-485 interface.
The BMSD controller, included to the complete drive, adjust motion speed, direction, acceleration and deceleration. The motion control provided by input signals or by commands via RS-485 interface.
Motor speed is adjusted by analog voltage signal 0-5VDC, by potentiometer - internal (there is a built-in potentiometer on the case of the BMSD controller) or external (can be connected to the controller) or by a command via RS-485. Start/stop and direction are digital signals, also can be controlled via RS-485. The inputs are duplicated by buttons on the controller's case. Inputs (and buttons) handle a signals as per the front edge or signal level. The version depends on a controller firmware - please, ask when order.
The main parameters of DC gear drive BMS7165-30
- Motor power: 200W
- Rated torque: 110kgf*cm
- Rated speed: 100rpm
- Reduction ratio: 1/30
- Gearhead type: worm
- Voltage: 24VDC
- Current: <8.3Amp