Catalog products

Breadcrumps

product card

Linear actuator : LD3-12-40-K3

Linear actuator LD3-12-40-K3

Voltage 12/24 VDC
Push/pull force 1000 N
Rated speed 5.5 mm/s
Stroke 50 – 300 mm
Hall sensors optional

Robust and strong actuators with a gear ratio 1:40 provide a push/pull force of up to 1000 N and are used in systems with high demands on the output force. The actuator can be ordered with built-in Hall sensors.

technical data

Technical data

Voltage 12 VDC
Rated current 3.2 A
No load current 1.2 A
Push/pull force (max) 1000 N
Self-locking force (max) 2500 N
Rated (full load) speed 5.5 mm/s
No load speed 7.0 mm/s
Available stroke length 50 mm, 100 mm, 150 mm,
200 mm, 250 mm, 300 mm
Protection class IP65
Noise level ≤70 dB
Gear ratio 1:40
Duty Cycle 25%
Positioning signal feedback 2 Hall sensors (optional)
Hall sensors resolution 14.27 pulses/mm
Operation temperature -26°C…+65°C

Load diagrams

Speed/load diagram of linear actuators LD3-12-40-K3
Speed/load diagram of linear actuators LD3-12-40-K3
Current/load diagram of linear actuators LD3-12-40-K3
Current/load diagram of linear actuators LD3-12-40-K3

Dimensions

Stroke, S 50 100 150 200 250 300
A, mm 158 209 260 311 362 413
B, mm 208 309 410 511 612 713
Dimensions of linear actuators LD3-12-40-K3
Linear actuator without Hall sensors
Dimensions of linear actuators LD3-12-40-K3
Linear actuator with 2 Hall sensors