Catalog products

Breadcrumps

product card

Linear actuator : LD3-24-20-K3

Linear actuator LD3-24-20-K3

Voltage 24 VDC
Push/pull force 500 N
Rated speed 12.3 mm/s
Stroke 50 – 300 mm
Hall sensors optional

The linear actuators are available with voltage 24V. Gear ratio 1:20 provides high force and sufficient stroke motion speed. The actuator can be installed into furniture, medical equipment, industrial applications. Built-in Hall sensors are available on demand.

technical data

Technical data

Voltage 24 VDC
Rated current 1.6 A
No load current 0.6 A
Push/pull force (max) 500 N
Self-locking force (max) 2500 N
Rated (full load) speed 12.3 mm/s
No load speed 14.6 mm/s
Available stroke length 50 mm, 100 mm, 150 mm,
200 mm, 250 mm, 300 mm
Protection class IP65
Noise level ≤70 dB
Gear ratio 1:20
Duty Cycle 25%
Positioning signal feedback 2 Hall sensors (optional)
Hall sensors resolution 6.86 pulses/mm
Operation temperature -26°C…+65°C

Load diagrams

Speed/load diagram of linear actuators LD3-24-20-K3
Speed/load diagram of linear actuators LD3-24-20-K3
Current/load diagram of linear actuators LD3-24-20-K3
Current/load diagram of linear actuators LD3-24-20-K3

Dimensions

Stroke, S 50 100 150 200 250 300
A, mm 158 209 260 311 362 413
B, mm 208 309 410 511 612 713
Dimensions of linear actuators LD3-24-20-K3
Linear actuator without Hall sensors
Dimensions of linear actuators LD3-24-20-K3
Linear actuator with 2 Hall sensors