ESCatalog products
- Home >
- Products >
- Stepper motors >
- Stepper motor with encoder - AS4118L1804-E
Stepper motor with encoder - AS4118L1804-E
| Size | NEMA 17 |
| Flange | 42 mm |
| Holding torque | 5.0 kgf*cm |
| Current per phase | 1.8 A |
| Length | 70.4 mm |
High-torque stepper motor with M12 connector with protection class IP65 (except shaft output) in size NEMA 17 (42 mm) and 1.8° step angle (full step). Identical flange size as the standard motor ST4118, therefore electrically and mechanically interchangeable.
Stepper motor AS4118L1804-E is designed for harsh operating environments and have high electromagnetic compatibility (EMC). It is supplied with integrated incremental encoder 500 CPR. Pre-assembled cables permit quick and error-free wiring and commissioning.
An extensive range of customized shaft and cable versions as well as custom-made products are available upon a request.
technical data
Technical data
| IP-protection motor (except shaft output) | IP65 |
| Encoder | yes |
| Encoder Type | incremental |
| Encoder resolution | 500 CPR |
| Operating voltage (encoder) | 5 V |
| Brake | no |
| Resistance per phase | 1.75 Ohm |
| Inductance per phase | 3.3 mH |
| Rotor inertia | 82 gcm² |
| Weight | 0.34 kg |
| Length "A" | 70.4 mm |
Dimensions AS4118L1804-E
