High-torque stepmotor IP65 with encoder AS8918L9504-E24
Size
NEMA 34
Flange
86 mm
Holding torque
93.3 kgf∙cm
Current per phase
9.5 A
Length
148 mm
High-torque stepper motor with M12 connector with protection class IP65 (except shaft output) in size NEMA 34 (86 mm) and 1.8° step angle (full step). Identical flange size as the standard motor ST8918, therefore electrically and mechanically interchangeable.
Technical data
Holding torque
93.3 kgf∙cm
Current per phase
9.5 A
Phase resistance
0.26 Ohm
Inductance
2.7 mH
Rotor inertia
3000 gcm²
Step angle
1.8°
Brake
no
Encoder
yes
Encoder type
incremental
Encoder resolution
4000 CPR
Operating voltage (encoder)
24 V
IP-protection motor
IP65
Weight
4.35 kg
Length «A»
148 mm
Holding torque
93.3 kgf∙cm
Current per phase
9.5 A
Phase resistance
0.26 Ohm
Inductance
2.7 mH
Rotor inertia
3000 gcm²
Step angle
1.8°
Brake
no
Encoder
yes
Encoder type
incremental
Encoder resolution
4000 CPR
Operating voltage (encoder)
24 V
IP-protection motor
IP65
Weight
4.35 kg
Length «A»
148 mm
Dimensions of stepper motor IP65 with encoder AS8918L9504-E24
Downloads
Get a quote
Dear guest
Thanks for your message!
We will contact you as soon as possible.
Error
Something goes wrong.
Please try later.