Products

We design and manufacture high-quality and cost effective drivers and controllers for DC brush, BLDC and stepper motors

Catalog products

Breadcrumps

  • GSGE60

    Worm gearbox for NEMA 23 and NEMA 24

    The GSGE60 gearboxes are intended for motor NEMA 23 or NEMA 24 (57 mm or 60 mm flange size). The output shaft is located 90° from the motor shaft. Worm gearboxes are characterized by self-locking and characterized by high efficiency. GSGE gearboxes come with a long-term synthetic lubricant, and are therefore maintenancefree. The gearbox can only be ordered with a motor.

    Worm gearbox for NEMA 23 and NEMA 24

    Reduction ratio 5 - 50
    Motor size NEMA 23 (Flange 57 mm)
      NEMA 24 (Flange 60 mm)
    Max. Backlash 120 ‘ (arc minutes)
    Rated torque up to 34 Nm
  • GSGE80

    Worm gearbox for NEMA 34

    The GSGE80 gearboxes are intended for motor NEMA 34 (86 mm flange size). The output shaft is located 90° from the motor shaft. Worm gearboxes are characterized by self-locking and characterized by high efficiency. GSGE gearboxes come with a long-term synthetic lubricant, and are therefore maintenancefree. The gearbox can only be ordered with a motor.

    Worm gearbox for NEMA 34

    Reduction ratio 12.5 - 50
    Motor size NEMA 34
      (Flange 86 mm)
    Max. Backlash 120 ‘ (arc minutes)
    Rated torque up to 67 Nm
  • SMSD-4.2CAN

    GPLL22

    Planetary gearbox for NEMA 8 and NEMA 11

    SMSD-4.2CAN is intended for operation under the control of a PLC with CANopen protocol. It provides velocity and position control and homing function according to the standard. The controller provides USB connection and free software for parametrization. STEP/DIR pulse position control is also provided.

    Planetary gearbox for NEMA 8 and NEMA 11

    Reduction ratio 5 - 90
    Motor size NEMA 8 (Flange 20 mm)
      NEMA 11 (Flange 28 mm)
    Max. Backlash 150 ‘ (arc minutes)
    Rated torque up to 0.4 Nm
  • GPLL40

    Economy planetary gearbox

    GPLL40 gearboxes are intended for little stepper and BLDC motors NEMA 17 size (flange 42 mm). The model is made of metal and provides rated torque up to 1.8 Nm. These planetary gearboxes are an economic alternative to precision planetary gearboxes.

    Economy planetary gearbox

    Reduction ratio 4 - 49
    Motor size NEMA 17
      (Flange 42 mm)
    Max. Backlash 180 ‘ (arc minutes)
    Rated torque up to 1.8 Nm
  • GPLL52

    Economy planetary gearbox

    Economy metal planetary gearboxes GPLL52 are intended for stepper and BLDC motors NEMA 23, NEMA 24 and NEMA 34 (flange 56, 60 and 86 mm). These gearboxes are ideal for applications that require a higher torque than that provided by a direct drive.

    Economy planetary gearbox

    Reduction ratio 4 - 100
    Motor size NEMA 23, 24, 34
      (Flange 56, 60, 86 mm)
    Max. Backlash 180 ‘ (arc minutes)
    Rated torque up to 10 Nm
  • GP42

    Planetary gearbox

    High-torque planetary gearboxes are used with NEMA 17 stepper motors and brushless DC motors. Using of the gearbox results in a compact and powerful drive unit that is suitable for a wide variety of applications. The GP42 series is equipped with an 8-mm shaft and planets that run on sliding bearings.

    Planetary gearbox

    Reduction ratio 4 - 45
    Motor size NEMA 17
      (Flange 42 mm)
    Max. Backlash 51 ‘ (arc minutes)
    Rated torque up to 9.9 Nm
  • GP56

    GP56

    Planetary gearbox

    High-torque planetary gearboxes are used with NEMA 23 and NEMA 24 stepper motors and brushless DC motors. Using of the gearbox results in a compact and powerful drive unit that is suitable for a wide variety of applications. Planetary gears on needle bearings increase the efficiency and service life of the gearbox.

    Planetary gearbox

    Reduction ratio 4 - 62
    Motor size NEMA 23 (Flange 56 mm)
      NEMA 24 (Flange 60 mm)
    Max. Backlash 31-35 ‘ (arc minutes)
    Rated torque up to 29 Nm
  • GPLE22

    GPLE22

    Precision planetary gearbox

    The low-play planetary gearboxes for NEMA 8 (20 mm), NEMA 11 (28 mm) and NEMA 17 (42 mm) motors provide high running torques, high torsional stiffness, low circumferential backlash, high admissible axial and radial shaft loads and low running noise.

    Precision planetary gearbox

    Reduction ratio 4 - 62
    Motor size NEMA 8, 11, 17
      (Flange 20, 28, 42 mm)
    Max. Backlash 31-35 ‘ (arc minutes)
    Rated torque up to 29 Nm
  • GPLE40

    GPLE40

    Precision planetary gearbox

    The low-play planetary gearboxes for NEMA 17 (42 mm), NEMA 23 (56 mm) and NEMA 24 (60 mm) motors provide high running torques, high torsional stiffness, low circumferential backlash, high admissible axial and radial shaft loads and low running noise.

    Precision planetary gearbox

    Reduction ratio 3 - 32
    Motor size NEMA 17, 23, 24
      (Flange 42, 56, 60 mm)
    Max. Backlash 15-19 ‘ (arc minutes)
    Rated torque up to 20 Nm
  • GPLE60

    GPLE60

    Precision planetary gearbox

    The low-play planetary gearboxes for NEMA 23 (56 mm), NEMA 24 (60 mm) and NEMA 34 (86 mm) motors provide high running torques, high torsional stiffness, low circumferential backlash, high admissible axial and radial shaft loads and low running noise.

    Precision planetary gearbox

    Reduction ratio 3 - 25
    Motor size NEMA 23, 24, 34
      (Flange 56, 60 mm, 86 mm)
    Max. Backlash 10-12 ‘ (arc minutes)
    Rated torque up to 70 Nm
  • GPLE80

    GPLE80

    Precision planetary gearbox

    The low-play planetary gearboxes for NEMA 34 (86 mm) motors provide high running torques, high torsional stiffness, low circumferential backlash, high admissible axial and radial shaft loads and low running noise.

    Precision planetary gearbox

    Reduction ratio 3 - 512
    Motor size NEMA 34
      (Flange 86 mm)
    Max. Backlash 7-11 ‘ (arc minutes)
    Rated torque up to 120 Nm