Company news
News about our developments, improved versions of products and company events.
Please, follow our news to keep abreast of events
News about our developments, improved versions of products and company events.
Please, follow our news to keep abreast of events
- Home >
- News
-
- New DC brush motor controller BMD-5DIN
- August 2023
- New DC brush motor controller BMD-5DIN
- August 2023
BMD-5DIN is a speed controller for DC brush motors up to 5 Amps. The controller is cheaper than the base 20A version and it can be successfully used in the most low power systems. Motor speed is regulated by analog signal or can be adjusted by an internal potentiometer. To prevent motor overloading, the speed controller provides current limitation function.
-
- SMSD-4.2LAN, SMSD-8.0LAN
- May 2023
- SMSD-4.2LAN, SMSD-8.0LAN
- May 2023
SMSD-4.2LAN and SMSD-8.0LAN stepmotor controllers available for order.
-
- SMSD‑1.5Modbus ver.3, SMSD‑4.2Modbus, SMSD‑8.0Modbus
- March 2023
- SMSD‑1.5Modbus ver.3, SMSD‑4.2Modbus, SMSD‑8.0Modbus
- March 2023
We have updated the stepper motor controllers SMSD-1.5Modbus ver.2 and launch new 4A and 8A modifications. Now the new models SMSD‑1.5Modbus ver.3, SMSD‑4.2Modbus and SMSD‑8.0Modbus are already on sale.
-
- SMD-4.2DIN ver.3 and SMD-8.0DIN ver.3
- February 2023
- SMD-4.2DIN ver.3 and SMD-8.0DIN ver.3
- February 2023
We have updated our popular stepper motor drivers SMD-4.2DIN ver.2 and SMD-8.0DIN ver.2. Serial production has already begun and the drivers are ready to be ordered. New models SMD-4.2DIN ver.3 and SMD-8.0DIN ver.3 provide more efficient stepper motor control - better dynamics and high positioning accuracy.
-
- Exhibition in Nuremberg
- September 2022
- Exhibition in Nuremberg
- September 2022
We’re excited to announce that Smart Motor Devices OU will be attending the Smart Production Solutions (SPS) international exhibition for industrial automation in Nuremberg, Germany from 8‑10 November 2022! Meet us at our stand (Hall 4/126)!
-
- Open frame and carrier kit stepper drivers
- August 2022
- Open frame and carrier kit stepper drivers
- August 2022
New product line - frameless stepper motor drivers (open frame versions) and drivers in an open housing with DIN clamp (carrier kit version). Drivers are available in four modifications - with a maximum phase current of 1.6A, 2.8A, 4.2A and 8.0A
-
- BLSD-20Modbus
- May 2022
- BLSD-20Modbus
- May 2022
Firmware of BLDC controllers has been updated. We added Mathematical and logical operations, increased the number of auxiliary registers. Also now it is possible to operate with 32-bit data. Another improvement is four quadrant speed control - now the direction of the load does not affect the stabilization of the motor speed.
-
- BMSD-20Modbus and BMSD-40Modbus
- March 2022
- BMSD-20Modbus and BMSD-40Modbus
- March 2022
Firmware of DC brush motor controllers has been updated. Mathematical and logical operations, as well as work with 32-bit variables have been added to the functionality of the controllers.
-
- BMD-20DIN ver.2
- January 2022
- BMD-20DIN ver.2
- January 2022
New version of DC motor controllers is ready. New methods of speed control were added to the new model BMD-20DIN ver.2
-
- SMSD-1.5Modbus ver.2
- January 2022
- SMSD-1.5Modbus ver.2
- January 2022
The new version is close to release. We have added the function of debugging of user programs. Now it is even easier to make operation algorithms.
-
- BLSD-20Modbus
- November 2021
- BLSD-20Modbus
- November 2021
BLDC motor controllers BLSD-20Modbus has been updated for four-quadrant speed control. Now speed control is precise and doesn't depend on load direction.
-
- SMD-4.2DIN ver.2
- November 2021
- SMD-4.2DIN ver.2
- November 2021
Functionality, firmware and software for stepper motor controller SMD-4.2DIN ver.2 has been updated. New version is available now.
-
- BMD-20DIN and BMD-40DIN
- October 2021
- BMD-20DIN and BMD-40DIN
- October 2021
New version of firmware provides better thermal protection functionality.
-
- SMSD-4.2RS
- March 2021
- SMSD-4.2RS
- March 2021
We have completed new revision and launched the production of the first batch of updated stepper motor controllers SMSD‑4.2RS with RS‑232 and RS‑485 interfaces.
-
- Modbus Special Utility
- March 2021
- Modbus Special Utility
- March 2021
A new version of the software "Modbus Special Utility" for DC brush controllers BMSD-20/40Modbus and BLDC controllers BLSD‑20Modbus has been released.